PRODUCT CENTER
CONTACTS
If you are interested，please contact us by email
A533 Pressure Vessel Steel Plate
ASTM A533 Boiler vessel plates are manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates suitable for welding pressure vessels. Often with quenching and tempering heat treatment, that is, quenching and tempering state supply. ASTM A533 boiler vessel steel is available in five different strength grades: Class A, Class B, Class C, Class D, and Class E. There are three levels of each category: level 1, level 2 and level 3.
GB/T11251 1345 Alloy Structural Steel Coil
GB/T 11251 alloy steel is one of the common hot-rolled alloy structural steel coils. GB/T 11251 Hot-rolled coil has high strength and wear resistance, high hardenability, moderate cold deformation plasticity, good cutting performance and good welding performance. During the heat treatment, the toughness of the steel decreases less. GB/T 11251 alloy steel can still maintain high toughness under water cooling conditions, but it has a tendency of overheating sensitivity, white spot sensitivity and temper brittleness.
A179 seamless cold drawn low carbon steel pipe is equivalent to China's No. 10 high-quality low-carbon steel. A179 is suitable for cold-drawn high-quality low-carbon seamless steel pipes for heat exchangers and condensers.
DX53D/ SGCD2/SGCD3 Galvanized Sheet
The material of DX53D galvanized sheet is a non-ferrous alloy composed of zinc as the matrix and adding other elements. The main alloying elements are aluminum, copper, magnesium and so on. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and resistance to atmospheric corrosion.
According to the manufacturing process, it is divided into cast zinc alloy and deformed zinc alloy. The commonly used casting zinc alloy is zinc-aluminum-copper-magnesium alloy, which has good casting process performance, and the cooling rate has little effect on the mechanical properties. They are mainly used in the manufacture of mechanical parts, toys, decorations and household appliances.
The thickness of AZ150 coating is 18 microns on one side and 36 microns on both sides. The coating alloy of the steel consists of 55% aluminium, 43.4 zinc and 1.6 silica. This coating of steel acts as a passive barrier to general corrosion. Once the sheet is exposed to electrolyte or moisture, another coating may form a galvanic cell. This exposure results in spillage of zinc ions and corrosion protection of the exposed steel. It also helps protect steel from trimmed edges and scratches.
Low Carbon Bright Alkaline Steel Wire
Low-carbon bright alkaline steel wire is a good general-purpose grade and is the most common type in daily life, such as hangers, electrical shelves, store displays and paper clips. It has good bending and flattening performance, is easy to form, and is conducive to welding. The carbon content of low carbon bright alkaline steel wire ranges from 0.06 to 0.20 percent, but the most commonly used grades are 1008(0.08 percent carbon) and 1018(0.18 percent carbon). Low-carbon bright alkaline steel wire is most often supplied in a "drawn" or "hard drawn" state, but can also be supplied in a bright annealed state according to special requirements.
Ductile iron is a high-strength cast iron material developed in the 1950s. Its overall performance is close to that of steel, and owing to its excellent properties, it has been successfully used to cast certain complex load-bearing parts requiring high strength, toughness, and wear resistance. Ductile iron has rapidly developed into one of the most widely used cast iron materials, second only to gray cast iron. The term “using iron instead of steel” primarily refers to ductile iron.
Ductile iron is a high-strength cast iron material developed in the 1950s. Its overall performance is close to that of steel, and owing to its excellent properties, it has been successfully used to cast certain complex load-bearing parts requiring high strength, toughness, and wear resistance. Ductile iron has rapidly developed into one of the most widely used cast iron materials, second only to gray cast iron. The term “using iron instead of steel” primarily refers to ductile iron.
304 stainless steel is a kind of universal stainless steel material, rust resistance than 200 series of stainless steel material is stronger. High temperature resistance is also better, can be as high as 1000-1200 degrees. 304 stainless steel has excellent corrosion resistance and good intergranular corrosion resistance. For oxidizing acids, it is concluded in the experiment that 304 stainless steel has strong corrosion resistance in nitric acid with a concentration of less than or equal to 65% of the boiling temperature. It also has good corrosion resistance to alkali solution and most organic and inorganic acids.
Rectangular HSS is often used within welded steel frames where loading occurs from multiple directions. The flat shape makes rectangular HSS ideal for construction. It is often used to create a pleasing aesthetic effect.
Stainless steel I-beams are made of 201(1Cr17Ni5Mn6N), 202(2 Cr13Mn9Ni4), 301(1 Cr17Ni7), 303(Y1Cr18Ni9), 304(OCr18Ni9), 304L (03 Cr19Ni10), 316(0 Cr17Ni12Mo2), 316L(00 Cr17Ni14Mo2), 321 (1 Cr18Ni9Ti), 420( 2cr13), 310S(0 Cr25Ni20), etc. The chemical composition of stainless steel I-beams belongs to general structural rolled steel series, the main test indexes were C, Mn, P and S. According to different grades, the content varies, the approximate range is C<0.08%, Mn: 2.0, P<0.035%, S<0.03%. Materials are widely used in hardware products, medical machinery, food machinery, ships, automobiles, doors and windows, furniture, large machinery, etc.
Grade 316 stainless steel is an austenitic form of stainless steel with a molybdenum content of 2-3%. The addition of molybdenum makes the metal more resistant to pitting and corrosion and improves its resistance to exposure to high temperatures. This grade of stainless steel is particularly effective when used in acidic environments. With this metal, corrosion caused by acetic acid, hydrochloric acid and other forms of acid can be prevented.
GET A FREE QUOTE
CONTACT US
Add : Shandong Province, China
GET A FREE QUOTE