Application fields of stainless steel plate
Stainless steel plate is a type of steel that forms a passive chromium oxide film, which provides resistance to corrosion from most atmospheric conditions, water, and various acid-base media. This property makes it widely applicable across numerous industries. Below are several major application areas for stainless steel plates:
28
2025
/
09
Carbon steel plate is a metal material composed primarily of iron and carbon, along with several other elements. Typically, the carbon content in carbon steel plates does not exceed 2.1% by weight. They also contain small amounts of elements such as sulfur, phosphorus, molybdenum, and chromium. Due to variations in their chemical composition, carbon steel plates exhibit different physical and mechanical properties.
15
2025
/
09
What issues should be noted when storing galvanized steel pipes
Galvanized steel pipes are steel pipes with a zinc coating, which is applied to enhance their corrosion resistance. The zinc layer protects the underlying steel from moisture (such as water vapor), helping to prevent rust and extend the pipe’s service life.
03
2025
/
09
The Difference Between H-Beam And I-Beam
Differences in Properties and Structures The inner and outer surfaces of the flange of an H-beam are straight and parallel, with little to no taper. This gives the H-beam strong resistance to bending in all directions. In addition, its high section modulus and relatively light weight help save material and reduce construction costs.
25
2025
/
08
What is the main use of steel angle bar?
Mild steel angle bars are primarily utilized to deliver structural support and reinforcement across a wide spectrum of building and infrastructure projects. Their characteristic L-shaped cross-section offers excellent load-bearing capacity and bending resistance, making them particularly suitable for applications in framing, bracing, connecting beams, and supporting various structural members. Carbon steel angle bars, with higher tensile strength, are commonly employed in the fabrication of building skeletons, load-bearing beams, columns, as well as brackets, shelving systems, stair stringers, and equipment supports.
12
2025
/
08
Introduction Of Heat Treatment
Quenching: The steel pipe is heated above the critical temperature and then rapidly cooled to form a hard and brittle martensitic structure, which improves the strength and hardness of the steel pipe.
01
2025
/
08
CONTACT US
Add : Shandong Province, China
GET A FREE QUOTE